Lennox BAC 024 SNM 3M, Инструкция по установке, эксплуатации и обслуживанию

Страница: 85 / 102

• 81 •
  
   
  
   
   
  
   
   
  
BALTIC-IOM-0412-E / Control manual
USE
If the value of the selected item is modi fi ed :
• To activate the modi fi ed value, press the knob .
• The
  
symbol appears on the right side of the value.
• Turn the knob to adjust the desired value.
• Press again on the knob to con fi rm your choice.
• The
  
symbol is no longer displayed on the right side of the value.
• The rotation of the knob allows to select a new item.
Setting value
This item allows you to view and/or modify the control temperature required for the rooftop selected.
If this point is changed, this value is used until the scheduling changes mode (A, B, C, D, BMS).
At each change of the mode, the CLIMATIC™ 60 sets the value of this set point on the preset value in the mode concerned.
If level 2 is active, this item allows you to view and/or change the preset temperature control for the active mode.
This item can see the code of different active alarms on the rooftop.
If the rooftop isn't in alarm, this item is to 0.
By this item it's possible to reset the alarm activated. To do this set the value of the item to the value 0.
This item indicates the measure temperature of the air outside.
This item indicates the measured air temperature in the room conditioning.
The room temperature isn't available if the CLIMATIC™ 60 is con
fi gured to supply control.
This item indicates the measured rate of CO² in conditioning room, in ppm.
The measurement of CO² isn't available if the option isn't set.
This item indicates the measure of outlet air temperature of the rooftop.
This item shows the measured relative humidity of the air in the room conditioning.
The room humidity isn't available if the option of humidity management isn't set.
This item indicates the measured value of the opening rate of the fresh air damper, in%, (mixture of outside air and return air)
This value is only available if the rooftop is equipped with this option.
Volatile temperature set point
Predetermined temperature set point
Alarms code
Outdoor temperature
Indoor (Room) temperature
CO
2
measurement
Supply temperature
Indoor (Room) relative humidity
Opening of fresh air damper
DISPLAY DC60