Lenel LNL-3300-M5, Руководство по установке

Страница: 32 / 184

Hardware Installation Guidelines
32 —
revision 7
• The enclosure tamper switch must be connected to the LNL-3300-M5 ISC as shown in Input Power,
Enclosure Tamper, and Power Fault Input Wiring on page 46 .
• The exit request input circuit and initiating device must be contained within the secured area. The exit
device circuit must be connected to listed switches or exit devices.
• The door strike power must be provided from a listed burglar alarm system power supply. If the door
strike circuit is arranged as fail secure (door remains locked upon loss of power), listed emergency
panic hardware must be provided to allow exit from the secured area. A fail-safe configuration results in
the door strike circuit unlocking in case of a power loss.
• Alarms in OnGuard must be set using the following priority list, with 1 being the highest priority and 7
being the lowest:
-
1 = Fire alarm and industrial supervision
- 2 = Hold-up or panic alarm
- 3 = Burglar alarm
- 4 = Watchman or guard tour
- 5 = Fire-alarm supervision
- 6 = Burglar-alarm supervision
- 7 = Industrial supervision
• The number of separate signals on a single channel must be limited to 1000.