Lenel LNL-3300-M5, Руководство по установке

Страница: 47 / 184

M Series Installation Guide
revision 7 —
47
10 Configuration
To configure the LNL-3300-M5 ISC, use the embedded web configuration page to complete basic
configuration, such as:
• Communication address
• Connection type
• Data security
• Port number
• User accounts
For more advanced configuration options, use a host application, such as the OnGuard software.
10.1 Web Configuration
10.1.1 Logging in for the First Time
There is one pre-defined default user available on the LNL-3300-M5. To enable the default user, place DIP
switch SW1 in the ON position after power-up. For more information, refer to
DIP Switches on page 41.
Since there are no other users defined yet when logging on for the first time, use the default user name
(admin) and password (password) to configure the ISC.
Notes: After configuring the LNL-3300-M5 using the web interface, make sure to place DIP switch
SW1 in the OFF position to enable the settings made.
All boards have a static certificate that reflects a static IP address. This causes a warning to
initially appear when trying to log in that states a problem with this website’s security
certificate. Although it is not recommended, proceed to the website.
10.1.2 Configuration via Web Page
The configuration web page can be launched in one of two ways:
• From within System Administration (only if an IP address or host name is specified).
• By using a browser to access the programmed IP address.
Depending on proxy settings, the configuration web page may need to be allowed. For more
information, consult the browser’s online help or system administrator.