Lenel LNL-3300-M5, Руководство по установке

Страница: 21 / 184

M Series Installation Guide
revision 7 —
21
Enclosure Tamper and UPS Fault Input Wiring
2.7.2 LNL-8000-MCOM
The LNL-8000-MCOM does not have dedicated inputs for enclosure tamper and UPS fault monitoring.
There are three options available to wire tamper and power fault switches in downstream controller
enclosures:
• Wire the tamper and power fault switches in series from the first controller enclosure to downstream
controller enclosures. Use conduit when wiring from one enclosure to the next, and ensure the conduit
is inaccessible. With this option, the user cannot determine which controller enclosure is reporting the
alarm.
• Wire the tamper and power fault switches to available inputs on the LNL-1100-20DI board.
• Wire the tamper and power fault switches to available reader port inputs.
The inputs on the LNL-1100-20DI, LNL-1320-2RP, and the LNL-1320-S2RP are monitor points configured
as unsupervised, Normally Closed contacts.
Enclosure Tamper and UPS Fault Input Wiring Callouts
Callout Description
1 TB1 on LNL-3300-M5 ISC
2 TB1-6: Ground connection
3 TB1-7: Enclosure tamper connection
4 TB1-8: UPS fault monitoring connection
5 Normally Closed contacts
1
GND
VIN
TB1
VIN
GND
GND
VIN
PFLT
TMPR
8
6
7
2
3
4
5