11
3.14 Training mode and making a conference call
Your Leitner headset allows a second headset to be temporarily connected to the base for
training or conference calls
• Turn on the primary headset
• Place the second headset on the charging base*
• The Online Indicator light on the secondary headset will turn on and the primary
base’s 3rd LED light will flash to indicate that the headset is registering with the
base unit
• Once the registering has completed, the LED light on the base will stop flashing and
the headset’s Online Indicator will begin flashing
• If the secondary headset has Automatic Answer enabled (section 3 .18), it will
automatically connect when you lift it from the base . If it has Automatic Answer
disabled, press the ON/OFF button on the secondary headset to connect
NOTE: The secondary headset will stay registered to the base for the duration of the call .
Turning off either headset will return the secondary headset to its normal state . Returning
either headset to its original base will also end training mode . It takes about 10 seconds for
the secondary headset to re-register to its original base
*Your SmartSet headset can only be conferenced with another SmartSet, LH270, or LH275 headset
