12
3.15 Overview of audio signals
With the optional Handset Lifter or Electronic Hookswitch Cable connected,
you’ll also get notified of incoming calls directly from your headset
3.16 Registering a new primary headset to the base
• Press and hold the Telephone Mode button on the base for five seconds to make
the base enter registration mode . The Telephone Mode light will flash showing the
base is in registration mode
• Press and hold the mute button on the headset until it begins to flash (about five
seconds) to make the headset enter registration mode
• Keep the headset out of the base until the light on the TEL button turns solid
• The headset will now be registered to the base which will take around 30 seconds .
When registration is complete, the Telephone Mode light will stop flashing
Sound
Indication
2 rapid beeps (60 sec repeat) Low battery
2 beeps
Nearly out of range
2 pitch tone
Out of range
4 rapid beeps
Back in range
1 beep
Receiver volume up/down
2 pitch tone (8 sec repeat)
Mute is on
1 beep
Mute off/on
Sound
Indication
Continual chime
Incoming call
1 beep (every 3 seconds)
Incoming call (when you’re already on a call)
