13
3.17 Permanently register an additional headset
• With the original headset out of the base, press and hold the Volume Up button
underneath the base for about five seconds to enter registration mode . The
Telephone Mode light on the base will begin to flash to indicate you’re
in registration mode
• Press and hold the ON/OFF button on the secondary headset until the light on the
headset begins to flash
• Wait until the ON/OFF light on the headset stops flashing (about 30 seconds)
• The 2nd headset is now permanently registered to the new base
• You can charge this headset on its original base without ending the permanent
registration mode
• To end the permanent registration, follow the instructions in 3 .16
NOTE: The first headset to turn on will become the primary headset . Only the primary headset can
answer and end calls
3.18 Controlling the Auto-Answer feature for calls
When you take your headset off of the base, your call will
not
be answered by default .
• If you’d like to turn this feature on, simply hold the ”+” and “–“ buttons on your
headset together for 3 seconds . You’ll know this feature is activated when the LED
light
slowly
flashes .
• To turn this feature back off, follow the same steps again . This time the LED light will
quickly
flash, letting you know this feature has been turned back off .
NOTE: Auto-answer will not work on Bluetooth mode . You’ll need to press the On/Off button on
your headset in order to answer Bluetooth calls
