Leister UNIROOF 300, Руководство пользователя, Страница: 2 / 59

2
Table of contents
1 Important safety instructions 4
1.1 Intended use 5
1.2 Non-intended use 5
2 Technical data 6
3 Transport 7
4 Your UNIROOF 700/300 8
4.1 Type plate and identification 8
4.2 Scope of delivery (standard equipment in the case) 8
4.3 Overview of device parts 9
5 Settings on the UNIROOF 700/300 11
5.1 Adjusting the welding nozzles 11
5.2 Additional weights for increasing the contact pressure weight 12
5.3 Adjusting the guide bar 12
5.4 How to adjust the movable transport axle (patent EP3 028 836 pending) 13
5.5 Retooling for different welding width 14
6 Commissioning your UNIROOF 700/300 16
6.1 Work environment and safety 16
6.2 Operating readiness 18
6.3 Positioning the device 19
7 Operation of your UNIROOF 700 20
7.1 Starting the device 20
7.2 Welding sequence 21
7.3 Finishing welding 21
7.4 Switching off the device / Maintenance 21
8 Quick Reference Guide UNIROOF 700 22
8.1 Switching on/Starting 22
8.2 Switching off 22
9 Control panel of the UNIROOF 700 23
9.1 Function buttons 23
9.2 Display 24
9.3 Setting the welding parameters 24
9.4 Display symbols of the status display (Display 40) 25
9.5 Display symbols of the work display (Display 41) 26
10 Settings and functions of the UNIROOF 700 software 27
10.1 Overview menu navigation UNIROOF 700 27
10.2 Basic settings and Advanced Mode 30
10.3 Recipes 30
10.4 Displaying target values (Set values) 32
10.5 Eco mode 33
10.6 Settings for LQS [Leister Quality System] data recording 33
Table of contents