manualshive.com logo in svg

Leister UNIROOF 300, Руководство пользователя, Страница: 51 / 59

Поделиться
Скачать
Leister UNIROOF 300 Скачать руководство пользователя страница 51

51

Symbol for Cool-down mode

Symbol for 

warning note, warning message or error message:

 

Allow the device to cool down. 

(see also   Warning notes / Symbols for warning and error messages [17])

Reference to service.
•  Symbol for hardware error message. 
The device is no longer ready for operation. Contact an authorized  

Leister Service Center. 

(Note the respective error code in Section   Warning and Error Messages [17]).

Status display

15.3 Display symbols of the status display (Display 34)

15.2 Display

During operation, the setpoints of the welding parameters (drive in m/min or ft/min, temperature in degrees 

Celsius or Fahrenheit), air volume in percent and, if applicable, information notes are displayed.

Use the 

Confirm (33)

 button to switch between the welding parameters and adjust the values individually with the 

Minus/Plus arrow (32)

 buttons.

34

 Status display

37

 Display of air volume in %

36

 Display of the air temperature in °C or °F

35

 Displays welding speed in m/min or ft/min  

(drive direction)

Содержание UNIROOF 300




























































Отзывы:

Нет отзывов