Leister UNIROOF 300, Руководство пользователя, Страница: 32 / 59

32
If the Set Values function is activated (factory setting), the actual temperature (high)
and the target temperature (low) are shown in the work display (41).
This applies analogously for drive (m/min) or air volume (percent).
Factory activated
If you do not wish to display the setpoint and actual value on the working display
(41), you can deactivate Set Values by pressing the Confirm (33) button.
10.4 Displaying target values (Set values)
You can adjust the parameters of your own recipes at any time.
To do this, in the menu Recipes select the submenu Edit by pressing the Minus (32) button.
Press the Confirm (33) button.
All customizable recipes are displayed.
Use the Minus (32) button to select the recipe to be adjusted.
Press the Confirm (33) button.
Use the Minus (32) button to select the parameter to be adjusted and then press the Confirm (33) button.
You can now set the desired value with the Minus/Plus (32) buttons.
The set value is accepted with the Confirm (33) button.
To save the setting, use the Minus (32) button to select the Save Recipe menu item and then press the Confirm
(33) button.