66
Welding wedge position factory setting
The factory setting of the welding wedge was set to
membranes with 2 mm thickness
. Material thicknesses of
1 – 3 mm can be welded with this welding wedge position.
200
500
B.
Prepare 2 mm test strips.
C. Vertical welding wedge setting:
Loosen slightly the two
cylinder screws
(55)
with socket wrench (wrench size 5
mm). Rotating the
adjusting screw for
welding wedge, vertical (23)
with the
socket wrench (wrench size 5 mm) ad-
justs the height of the
welding wedge
(5)
. For the correct setting, the
cylinder
screws (55)
must be in the middle of
the slotted holes. Tighten the
cylinder
screws (55)
with 8.8 Nm.
7
23
55
10
A. Press clamping lever locking device
(10)
and swing
clamping lever (7)
up-
wards until the lock engages and use
your other hand to accomplish this by
holding the automatic welding machine
fi rmly by the
handle (11) .
Unlock wel-
ding force safety bolts (9)
by pulling
and rotating 90°.
Set the clamping arm
(4) to the maximum opening
using
the
welding force adjustment ring (8)
.
9
8
4
11