Leica DMi8 A, Руководство по установке

Страница: 20 / 40

5. Assembling the microscope – incident light turret equipment
5.6 Equipping the incident light reflector turret
!
Caution!
First, completely read through this section before you begin
equipping the reflector turret disk.
The reflector turret disk can be accessed from both the
right side and the left side of the microscope (Fig. 22).
The positions on the reflector turret disk are numbered. De-
pending on how they are equipped, the individual filter and/
or reflector cubes are set in pre-assigned positions at the
factory. For details, check the identification sheet included
with your order.
• Remove the cover from the reflector turret disk (Fig. 22.1).
The cover is secured in place by a magnetic holder and
can be detached from the front.
• With the holder facing you squarely, slide the filter cube
or reflector cube forwards into the holder as described in
the identification sheet provided.
• Check to ensure that the cube is placed properly. A loose
cube can be damaged when rotating the turret disk or
can block the disk.
• Once all filter blocks and reflector blocks have been in-
serted, put the cover back in place.
Note:
Is the microscope equipped with a 2-fold filter turret, the
turret must be pushed across the arrester position to ex-
change the filter cubes. It is not possible to insert the filter
cubes when the turret is in the arresting position.
1
Fig. 22: Access to turret disk
1 Cover
Fig. 23: Equipping the turret disk
Fig. 24: Turret disk with used filter cubes
20