Leica DM1000 LED, Руководство по эксплуатации

Страница: 21 / 178

21
6. Assembly
6.6 Components for Fluorescence Applications
6.6.1 Fluorescence illuminator
The fluorescence illuminator is mounted in front
of the tube. It is fastened in place with the side
clamping screw (13.1).
6.6.2 106 z Lamp Housing
Caution!
Light sources pose a potential irradiation
risk (glare, UV-radiation, IR-radiation).
Therefore, lamps have to be operated in
closed housings.
During assembly, always unplug the power
supply unit of the 106 z lamp housing from its
socket.
During assembly work on xenon burners, al-
ways wear the supplied protective gloves
and face protection (Fig. 14) (risk of explosion).
Never touch the glass parts of the burner
with bare hands.
Never look directly into the beam path
(blinding hazard).
This lamp housing is used with various gas
discharge lamps.
Fig. 14
Protective gloves and mask
Caution!
Make sure to follow the instructions and
safety notes of the lamp supplier.
Before changing lamps allow at least 30 mins
for cooling down!
Inserting the Ggas Discharge Lamps (Hg and
Xe) into the 106z Lamp Housing
Hg and Xe lamps are powered by separate
supply units.
Read the separate instruction manual provided
with these supply units.
Fig. 13 Assembly of fluorescence illuminator
1 Clamping screw
1