Leica BIOSYSTEMS 14 0493 80101, Инструкция по эксплуатации

Страница: 60 / 102

60 Version 1.3, Revision D
Operation
5
-- No column is displayed if the RMS mode is set to be Off.
When the reagents are expired, the texts in the fields are highlighted with red.
Fig. 46
1
2
3 4 5
Note
After filling a bottle manually the bottle must be defined as Full.
Editing reagent status
L
Make sure that no program is running.
1. Press Status ( → "Fig. 46- 1 ") .
2. Select a reagent. The selected row is highlighted with red ( → "Fig. 46- 2 ") .
3. Press Set as Empty ( → "Fig. 46- 3 ") , or Set as Full ( → "Fig. 46- 4 ") , or Reset Data ( → "Fig. 46- 5 ") as
needed.
4. A message pops up, asking if you want to run a Bottle Check or not. When editing the paraffin
status, no messages will pop up.
Note
If the instrument is in heating, the Bottle Check function is disabled for about 30 minutes.
5. The reagent status is updated both in this window and on the Dashboard.
5.3.2 Groups
In the Groups window you can select the colors to be used for each reagent group in the program
display.
8 reagent groups are displayed: