manualshive.com logo in svg

Leica BIOSYSTEMS 14 0493 80101, Инструкция по эксплуатации

Поделиться
Скачать
Leica BIOSYSTEMS 14 0493 80101 Скачать руководство пользователя страница 31

31

HistoCore PEARL

 

Initial Operation

4

Note 

The exhausted vapors from the instrument is harmful. The active carbon filter must be in use.
The active carbon filter is only an additional measure to minimize harmful vapors in the area 

surrounding the instrument. Ventilation of the workroom is required in any case. The filter 

replacement is dependent on the frequency of using the instrument, but at least it needs to be 

replaced after 45 - 60 days.

Note 

The used carbon filter contains harmful fumes. Dispose of it with proper care according to the 

existing applicable local regulations.

4.4.4  External exhaust system

The instrument has been designed so that it can be connected to an external exhaust device. The 
optional delivery includes the "Extraction tube" 

(

→

 P. 97 – 8. Ordering information) 

for this purpose. It 

is recommended to use an external exhaust system.

Fig. 11 

 

1

Attach one end of the extraction tube 

(

→

 "Fig. 11-

1

")

 to the upwards-pointing tube of the flange

and push it down as far as it will go. Connect the other end of the extraction tube with the external 
exhaust station.

Caution 

Even if the instrument is connected to an external exhaust device, the active carbon filter provided must 

remain in use.

Содержание 14 0493 80101







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды