Leibinger JET3 up Скачать руководство пользователя страница 49

Страница: 49 / 214

10006

10006=Font Error.

One or more Fonts are
incorrect.

A font in the FONT directory is empty,
corrupted or cannot be read from the disk.

Carry out a software update

If software update is without
success, please contact
LEIBINGER

10007

10007=Jobfile Error

The desired job in the JOB directory is
empty, corrupted or cannot
be read from the disk.

Create a new job and load to
print.

10009

10009=Too many Fonts.

Please remove one or more
Fonts.

Too many Fonts. Please remove one or
more Fonts.

Please remove one or more
Fonts.

10201

10201=Service required
(working hours)

Service required (working hours)

A service for the printer is due.

10202

10202=Service required
(time interval)

Service required (time interval)

A service for the printer is due.

11000

11000=Warning!

You have opened the head
cover.

The head cover has been opened during the
production.

Before removing the head cover,
push button print stop if printer is
busy.

11015

11015=RIP- or SDC-
Software not found

Start again the software update.

Carry out a software update

If software update is without
success, please contact
LEIBINGER

Содержание JET3 up























































































































































































































Результаты поиска

Содержание JET3 up

Отзывы:

Leibinger JET3 up, Руководство по обслуживанию, Страница: 49 / 214

Результаты поиска

Содержание JET3 up

Отзывы: