Leibinger JET2 neo, Руководство пользователя

Страница: 212 / 294

Page 210 Job editor Group 8
Release R1.12 en JET2 neo
1
– Both sensors at the same height
6
– Input field <Sensor distance>
2
– Distance between sensors <A>
7
– Sensor 1 – Start measurement –
Connected to X5.5.
3
– Maximum <Sensor distance>
8
– Sensor 2 – Stop measurement –
Connected to X5.4 . This sensors
works also as PrintGo sensor
4
– The Distance A (between the 2 sensors)
has to be smaller than Distance B
(between the products)
9
– Input field <intern Speed>
5
– Wrong setup – more than one product
between the 2 sensors
Speed measuring with two sensors - Continuation
Description of the functionality

The two sensors have to be mounted on the production line in a way that they can be
activated by the products passing by. For this the two sensors have to be mounted on the
same height
(1) and at a certain distance from each other (2) .

As higher the production (line) speed as larger should be the sensor distance.

The maximum distance allowed is 250 mm (3) .

The distance between the two sensors has to be smaller than the distance between two
products
(4) .

As a rule of thumb there must be never more than one product between the 2 sensors! (5)

The actual distance has to be measured and entered in the corresponding input field (6) .
This input field is located on the tab <Encoder> in the dialogbox <Print parameter>
6
9
A