14
3. Plug the spreader cable into the 16-pin socket of the control panel.
To ensure an optimum electrical power supply, use the supplied
battery cable.
Caution!
Danger of short circuit
Observe the installation instructions of the adapter
manufacturer.
When fitting a 12/24 V adapter (available as an accessory) it is
necessary to connect a separate on/off switch in the 24 V supply cable,
as the adapter consumes current in standby mode.
Your equipment is now ready to operate.
2.4 Filling the spreading material hopper
Caution!
Health risk
Comply with the regulations of the spreading material
manufacturer.
Warning!
Risk of injury
Never open the hopper or touch the spreading disc when
the drive motor is running.
1. Fill the hopper with spreading material immediately before
starting work.
2.
After filling, close the hopper.
2 Mounting and starting