27
4 Settings and displays
4.5 Adjusting the empty indicator
Depending on the requirement and spreading material, the empty
indicator can be set to respond earlier or later.
The value for the empty indicator to switch on (if the spreading material
falls below a certain fill level) can be adjusted from -50 to +50.
Note:
Depending on the spreading material or material humidity, the remainder
level may vary somewhat.
Press the button to set the respective
value.
Factory setting is 0.
With
+
values, the empty indicator
responds at a higher fill level.
With - values, the empty indicator
responds at a lower fill level.
Setting 0
Empty
indicator ON
Press the toggle switch: the setting is
saved and now press the next menu item
or
Main switch: the setting is saved and the
machine switched off.
