22
3.8 Setting the spreading zone
You can set the zone within which the spreading material is to be
spread. This allows you to spread the material on a pavement for
example when the carrier vehicle is running along the road.
Spread the spreading material in the left-hand direction of travel
(when mounted at the rear):
turn the spindle (arrow) clockwise.
Spread the spreading material in the right-hand direction of travel
(when mounted at the rear):
turn the spindle (arrow) counter-clockwise.
3.9 Empty sensor
The empty indicator indicates when the spreading material in
the hopper drops below a certain level.
The following message flashes in the display for approx. 5 seconds:
Hopper empty
. At the same time, eight warning signals also sound
and the red LED on the empty sensor flashes.
To switch off the empty sensor again:
close the slide or switch off the spreader.
3 Operating the
POLARO
®
E
