2009-2013
FLH
RENEGADE
Disc Brakes
CAUTION: Brakes are a critical safety compo-
nent of the trike. Verify all brake components
have been properly installed before test riding.
Improper brake operation could result in death
or serious injury. Do not allow dirt or debris to
enter master cylinder reservoir. New brake
pads and rotors will have a break-in period be-
fore optimum brake operation is achieved.
Note: FOR ABS DISABLE, SEE PAGE 21
Brake System
1.
See Fig. 1.
Attach brass tee to differential
brace using the following hardware.
•
(1) Brass Tee– CF5105
•
(1) Spacer– S001530
•
(2) 1/4” x 1-3/4” Hex Bolt– CB1100
•
(2) 1/4” Flat Washers– CW2005
•
(2) 1/4” Lock Nut– CN3042
2.
See Fig. 1
. Install original brake line from
master cyclinder and rear braided lines to
brass tee using the following hardware. Torque
banjo bolt to
16 ft. lbs.
•
(1) Banjo Bolt– S002022
•
(2) Banjo Washers- GC6002
•
(2) 45” M10 Braided Line– S001976
3.
See Fig. 2
. Install (2) braided brake lines to
rear calipers as shown. Torque bolts to
16 ft.
lbs
.
•
(2) M10 Banjo Bolt– CB6001
•
(4) M10 Banjo Washers- GC6002
4. Secure brake lines to swingarm with cable ties.
BRAKE SYSTEMS
19
Fig. 1
Fig. 2
OEM line
Spacer
Install brake lines to LH/RH calipers