LEGRAND Wattstopper FSP-301 Скачать руководство пользователя страница 5

5

There is no communication with the Sensor Config App:

Perform a power cycle on the FSP-301.

ORDERING INFORMATION

Catalog #

Description

FSP-301

Digital Continuous Dimming PIR Fixture Integrated Sensor with Bluetooth

FSP-L2

360° lens, up to 44’ diameter at 8’ height

FSP-L2-S

360° lens, up to 44’ diameter at 8’ height, with shroud

FSP-L3

360° lens, up to 40’ diameter at 20’ height

FSP-L3-S

360° lens, up to 40’ diameter at 20’ height, with shroud

FSP-L7

360° lens, up to 100’ diameter at 40’ height

FSP-L7-S

360° lens, up to 100’ diameter at 40’ height, with shroud

FSP-C1

Small collar, for use with FSP-L2 and FSP-L3 lenses

FSP-C2

Large collar, for use with FSP-L7 lens

BZ-50

Power Pack: 120/277VAC, 50/60Hz, 20A ballast or incandescent

BZ-150

Power Pack: 120/277VAC, 50/60Hz, 20A ballast or incandescent, with Hold-On and Hold-Off capability

BZ-200

Power Pack: 120/277VAC, 50/60 Hz, 20A Ballast/ELV/MLV/Incandescent/LED, 16A, E-Ballast/CFL/Plug Load

BZ-250

Power Pack: 120/277VAC, 50/60 Hz, 20A, Ballast/ELV/MLV/Incandescent/LED, 16A E-Ballast/CFL/Plug Load,  

with Hold-On/Hold-Off capability

BZ-250-347

Power Pack: 120/347VAC, 50/60 Hz, 16A Ballast/ELV/MLV/Incandescent/LED/ E-Ballast/CFL, 15A Plug Load,  

with Hold-On/Hold-Off capability

Sensor is White.

FCC REGULATORY STATEMENTS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 

operation.

NOTE: 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated 

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used 

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in 

a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own 

expense.
This device complies with FCC and IC safety levels of radio frequency (RF) exposure for Mobile devices.
This device is only authorized for use in a mobile application. At least 20 cm of separation distance between this device and the user’s 

body must be maintained at all times.
Any changes or modifications not expressly approved by The Watt Stopper Inc. could void the user’s authority to operate the equipment.

IC REGULATORY STATEMENTS

This device complies with Industry Canada licence-exempt RSS standard(s). 
Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any 

interference, including interference that may cause undesired operation of the device. 

Hereby, LEGRAND declares that the radio equipment type FSP-301 is in compliance with Directive 2014/53/EU. The full text of the EU 

declaration of conformity is available at the following internet address: www.legrand.us

  This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent 

possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable 

reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the 

product was purchased. They can take this product for environmental safe recycling.

In order to enhance the security of our products, Legrand ships its products with all insecure ports closed and insecure protocols 

disabled. You are free to configure your device as needed, but in doing so note that you may be decreasing the security of your device 

and any information contained in the device. As you modify the device’s default settings, keep in mind how this may impact the security 

of the device and your network. In addition, you should use caution in connecting your device to the Internet, especially if you have 

altered the default security settings. If you have any questions or concerns about how your modifications of the device may affect its 

security, please contact the Legrand customer service team at 1-800-879-8585 / https://www.legrand.us/support/wattstopper.aspx

Содержание Wattstopper FSP-301

















Отзывы: