LEGRAND 0 484 22, Руководство пользователя

Страница: 25 / 29

24/29 25/29
Technical data sheet: S000074637EN-5 Updated: 12/03/2015 Created: 15/04/2014
mber(s): 0 484 22 Catalogue number(s): 0 484 22
KNX multiapplication controller 16 outputs
8. COmmUNiCaTiON OBJECTS (CONTiNUED)
e flags
002 DPT_
ool
CT
002 DPT_
ol_Control
007 DPT_
ontrol_Dim-
ng
010 DPT_
alue_1_
ount
001 DPT_
alue_2_
ount
001 DPT_
alue_4_
ount
t via the address linked with
002 DPT_
ool
CT
002 DPT_
ol_Control
007 DPT_
ontrol_Dim-
ng
010 DPT_
alue_1_
ount
001 DPT_
alue_2_
ount
001 DPT_
alue_4_
ount
t via the address linked with
uld be used or not. If
ers will be visible.
no influence on the
datapoint size of
Parameters Setting
value Type "Input Size" value Possible setting values
1 bit Value
On/Off
Enable/Disable
Up/Down
2 bits Value
Control Value
4 bits Value
Dimming
1 Byte Non-scaled value
Scaled value
Scene
2 Bytes Unsigned value
Floating value
4 Bytes Unsigned value
Floating value
Here it is possible to make an adjustment to set the datapoint type of
the comparison value.
value
1 bit | Value 0, 1
1 bit On/Off On, Off
1 bit Enable/Disable Enable / Disable
1 bit Up/Down Up / Down
2 bits Value 0, 1, 2, 3
2 bits Control Value Priority High / On
Priority High / Off
Priority Low / On
Priority Low / Off
4 bits Value
0  15
4 bits Dimming Up 100%, Up 50%, Up 25%,
Up 12%, Up 6%, Up 3%,
Up 1%, Stop, Stop, Down 1%,
Down 3%, Down 6%, Down
12%, Down 25%, Down 50%
1 Byte Non-scaled
value
0  255
1 Byte Scaled value 0

100%
1 Byte Scene
1

64
2 Bytes Unsigned
value
0  65535
2 Bytes Floating
value
0

65535
4 Bytes Unsigned
value
0

4294967295
4 Bytes Floating
value
0  4294967295
Here it is possible to make an adjustment to set the value that should
be compared to Program Fn Input XXX value. If equal, then the
program sequence starts.
Name Px_ Out -
put 1 (2

5)
string
This is a parameter to name the output X function.
Output 1
(2

5) Size
1 bit
2 bits
4 bits
1 Byte
2 Bytes
4 Bytes
Here it is possible to make an adjustment to set the datapoint size of
the “Program Fn Output Y XXX” communication object.
Parameters Setting
Output 1 (2

5)
value Type
"Input Size" value Possible setting values
1 bit Value
On/Off
Enable/Disable
Up/Down
2 bits Value
Control Value
4 bits Value
Dimming
1 Byte Non-scaled value
Scaled value
Scene
2 Bytes Unsigned value
Floating value
4 Bytes Unsigned value
Floating value
Here it is possible to make an adjustment to set the datapoint type of
the value that should be sent on the bus via the Program Fn Output Y
XXX communication object.
Output 1 (2

5)
value
1 bit | Value 0, 1
1 bit On/Off On, Off
1 bit Enable/Disable Enable / Disable
1 bit Up/Down Up / Down
2 bits Value 0, 1, 2, 3
2 bits Control Value Priority High / On
Priority High / Off
Priority Low / On
Priority Low / Off
4 bits Value 0

15
4 bits Dimming Up 100%, Up 50%, Up 25%,
Up 12%, Up 6%, Up 3%,
Up 1%, Stop, Stop, Down 1%,
Down 3%
Down 6%, Down 12%
Down 25%, Down 50%
1 Byte Non-scaled
value
0

255
1 Byte Scaled value 0
 100%
1 Byte Scene
1  64
2 Bytes Unsigned
value
0

65535
2 Bytes Floating
value
0

65535
4 Bytes Unsigned
value
0  4294967295
4 Bytes Floating
value
0

4294967295
Here it is possible to make an adjustment to set the value that should
be sent on the bus via the Program Fn Output Y XXX communication
object.
Equal ?
Output 1 object description
Output 1 value
Yes
Output 2 object description
Output 3 object description
Output 4 object description
Output 5 object description
Output 2 value
Output 3 value
Output 4 value
Output 5 value
Input value
Input object description
Value
S000074637EN-5.indd 25 20/05/15 10:16