LEGRAND 0 484 22, Руководство пользователя

Страница: 2 / 29

2/29
Technical data sheet: S000074637EN-5 Updated: 12/03/2015 Created: 15/04/2014 Technical data sheet
Catalogue number(s): 0 484 22
KNX multiapplication controller 16 outputs KNX multiapp
2. TEChNiCal fEaTUrES (CONTiNUED) 4. CONNECTiON
/ / / /
M M
Outputs
A - B
230 V ±
80 VA
0.3 A
250 VA
1.1 A
250 VA
1.1 A
2 (2 x 36) W
0.8 A
80 VA
0.3 A
80 VA
0.3 A
500 W
2.1 A
250 VA
1.1 A
250 VA
1.1 A
110 V ±
40 VA 125 VA 125 VA 1 (2 x 36) W 40 VA 40 VA 250 W 125 VA 125 VA
12 - 48
V ± /V =
4-15 VA 0.3 A
13-52
VA
1.1 A 13-52
VA
1.1 A
Outputs
C - D
230 V ±
160 VA
0.7 A
500 VA
2.1 A
500 VA
2.1 A
4 (2 x 36) W
1.7 A
160 VA
0.7 A
160 VA
0.7 A
1000 W
4.3 A
500 VA
2.1 A
500 VA
2.1 A
110 V
±
80 VA 250 VA 250 VA 2 (2 x 36) W 80 VA 80 VA 500 W 250 VA 250 VA
Outputs
E - F
230 V
±
500 VA
2.1 A
1000 VA
4.3 A
1000 VA
4.3 A
10 (2 x 36) W
4.3 A
500 VA
2.1 A
500 VA
2.1 A
3680 W
16 A
500 VA
2.1 A
500 VA
2.1 A
110 V
±
250 VA 500 VA 500 VA 5 (2 x 36) W 250 VA 250 VA 1760 W 250 VA 250 VA
Power supply unit
The device must be powered by an external power supply. Permitted voltage range: 27 to 50 V A / = , 6 W min.
Power outputs
-Blocks A and B (2 blocks of 2 relays: 2.1 A max. to be distributed in each of the blocks).
For roller blind control functions, exclusive signs (e.g. Do not disturb/Room service) and ON/OFF functions (for AC or DC load).
-Blocks C and D (2 blocks of 4 relays: 4.3 A max. to be distributed in each of the blocks).
For controlling 4 separate loads per block. Each block includes energy measurement.
-Blocks E and F (2 blocks of 2 relays: 16 A max. to be distributed in each of the blocks).
For controlling 2 separate loads per block. Each block includes energy measurement.
Dali output
For controlling 64 DALI ballasts in Broadcast mode. Pairing between the device and the DALI output is not necessary.
The DALI BUS power supply is incorporated in the device. Imax 128 mA/12 V = . If I is greater than 128 mA, use an external power supply (remove the
jumpers from the DALI terminals).
Control inputs
- Blocks G and H.
The device has 2 blocks each one having power supply output (12 V = ) and 8 auxiliary inputs. Switches or pushbuttons can be connected to the
inputs in order to send ON/OFF, dimming, shutter raising/lowering or scenario control commands, their settings can be configured using the ETS
configuration software. The power supply enables the controls to have pilot lights (standby).
1
LED bulbs
2
ELV halogen, compact fluorescent and fluorescent bulbs with separate
electronic ballast
3
ELV halogen, compact fluorescent and fluorescent bulbs with separate
ferromagnetic ballast
4
Fluorescent tubes
5
Compact fluorescent bulbs with built-in electronic ballast
6
Compact fluorescent bulbs with built-in ferromagnetic ballast
7
Halogen bulbs
8
Motors
9
Contactors
• Single phase
1 2 3 4 5 6 7 8 9
3. DimENSiONS
213
83
L 4 3 2 1
L
1 2 3 4
L
1 2
1 2 3 4 8 7 6 5
1 2 1 2
DA DA
12 V = 128 mA
27-50 V /
Made in France
A B C D E
L
1 2
F
DALI
G
+ -
H
+ - 1 2 3 4 8 7 6 5
- +
110/230 V A
50/60 Hz
6 W
- +
N
C
N
D
N
E
N
F
0
484
22
Power : 27 - 56 V A / =
64 Ballasts max DALI :
Default
Power Prog & Reset
A = B =
2,1 A max
C = D =
4,3 A max
E = F =
16A max
12 V = 12 V = 60 mA 60 mA
45
66
50
S000074637EN-5.indd 2 20/05/15 10:16