LeCroy ADP300, Инструкция по эксплуатации, Страница: 9 / 39

ADP30X Operator’s Manual
ADP30X-OM-E Rev B
3
OVERVIEW
Description
The ADP30X family of high voltage active differential probes is safe, easy-to-use, and ideally
suited for power measurements.
The 20 MHz ADP300 is perfect for troubleshooting low frequency power circuits, and other
circuits where the reference potential is elevated from ground or the location of ground is
unknown.
The 100 MHz ADP305 is designed for measuring high-speed floating voltages found in today’s
power electronics, like switching power supplies.
With the ProBus interface, the ADP30X becomes an integral part of the oscilloscope. For the
ADP305, the attenuation, offset, and bandwidth limit are all controlled from the oscilloscope’s
front panel or by means of remote control commands. This means that the complete
measurement setup can be saved and recalled by the oscilloscope and all measurement values
will be correct. The oscilloscope provides power to the probe, so there is no need to worry about
a separate power supply or changing batteries.
The sensitivity of the ADP300 ranges from 1 V/div to 350 V/div; and the sensitivity for the
ADP305 ranges from 200 mV/div to 350 V/div.
Attenuation is automatically selected by the oscilloscope to either
÷
100 or
÷
1000.
Key Benefits
•
True Differential Measurements
•
EN 61010 1000 V CAT III Safety Compliance
•
ProBus Interface with Automatic Scaling
•
Auto-Zeroing