23
11 Troubleshooting and fault correction
11.1 General
This section contains troubleshooting information. It is intended to simplify the task of identifying
the sources of faults.
But, here again, the general rule applies: If the source of a fault cannot be unambiguously identi-
fied then, if in doubt, contact the manufacturer of the component.
!
If you are in any doubt, it is essential to contact the component manufacturer!
11.2 Table
Fault
Possible cause
Solution
Mechanical arrest system
does not lock
Release bar not engaged in
tooth space
Repeat procedure in accor-
dance with section 6.7
Release bar is broken
Replace the mechanical
arrest system
Sensors dirty or defective
Clean or replace the sensors
Mechanical arrest system
does not unlock
Release bar is stuck
Repeat procedure in accor-
dance with section 6.7
Sensors dirty or defective
Clean or replace the sensors
11 T
roubleshooting and fault correction
