![background image](http://html1.mh-extra.com/html/leantechnik/lean-sl/lean-sl_assembly-instructions-manual_1865265013.webp)
13
The machine and component manufacturer cannot be held liable for damage to property or
personal injury in the following cases:
· If the component has been modified compared to its original design
· If the component has been used or maintained in ways contrary to those set out in these instruc-
tions.
· If the component has been operated or maintained by untrained or unauthorized personnel.
4.2 Choice of personnel and qualifications
Persons
Activity
(lifecycle phase)
Specially trained
personnel
Instructed
operating
personnel
Instructed personnel
with specialist training
(mechanics /
electrical engineering)
Transport
X
–
–
Installation
X
–
–
Commissioning
X
–
–
Setup
X
–
X
Normal operation
X
X
–
Cleaning
X
X
–
Maintenance
X
–
X
Troubleshooting and
correction of faults
X
–
X
Disassembly
X
–
–
Disposal / recycling
X
–
–
Key: X = Permitted / -- = Not permitted
Internal instructions must define, on the basis of the employees’ qualifications, who is responsible
for what tasks and is then authorized to perform them.
The minimum legal age of personnel must be observed.
4.3 Transporting the mechanical arrest system
The mechanical arrest system is transported in its assembled state.
=> see the documentation for lifgo
®
, lifgo
®
linear and lean SL
®
=> see section 5 Transport and lifting instructions
4 Safety instructions