
Hardware
installation manual of the multi-axis drive MX4660
Leadshine Technology Co., Ltd
Leadshine America, Inc.
Page 25/28
3/F, Block 2, Nanyou Tianan Industrial Park, Shenzhen, China
25 Mauchly, Suite 318, Irvine, CA 92618, USA
Tel: 86-755-26409254
Fax: 86-755-26402718
Tel: 1-949-608-7270
Fax: 1-949-608-7298
Web:
www.leadshine.com
Email:
Web:
www.leadshine.com
Email:
Appendix E: Digital Outputs
Name
Description
Output 1 +
General purpose output (max 24V@70mA). This pin is connected to pin 17 - “Input 1” - of the
DB25 connector. Used to output the digital signal, sent through DB25 “Input 1” from the motion
controller, to the connected external device here. Its maximum frequency is 200 kHz.
Output 1-
General purpose output- for Output 1
Output 2 +
General purpose output (max 24V@70mA). The pin is connected to pin 1 - “Input 2” - of the DB25
connector. Used to output the digital signal, sent through DB25 “Input 2” from the motion
controller, to the connected external device here. Its maximum frequency is 200 kHz.
Output 2-
General purpose output -for Output 3
Output 3 +
General purpose output (max 24V@70mA). This pin is connected to pin 8- “Input 3” - of the 26-pin
low-profile header. Used to output the digital signal, sent through 26-pin low-profile header “Input
3” from the motion controller, to the connected external device here. A 2
nd
parallel port or an
external device like SmoothStepper is required for this function. Its maximum frequency is 200
kHz.
Output 3-
General purpose output -for Output 3
O
General purpose output (max 24V@70mA). This pin is connected to pin 9-“Input 4” - of the 26-pin
low-profile header. Used to output the digital signal, sent through 26-pin low-profile header “Input
4” from the motion controller, to the connected external device here. A 2
nd
parallel port or an
external device like SmoothStepper is required for this function. Its maximum frequency is 200
kHz.
Output 4-
General purpose output -for Output 4
Output 5+
General purpose output (max 24V@70mA). This pin is connected to pin 17 - “Input 5” - of the
26-pin low-profile header. Used to output the digital signal, sent through 26-pin low-profile header
“Input 5 from the motion controller, to the connected external device here. A 2
nd
parallel port or
an external device like SmoothStepper is required for this function.
Output 5
General purpose output -for Output 3
Output 6+
General purpose output (max 24V@70mA). This pin is connected to pin 1 - “Input 6” - of the 26-pin
low-profile header. Used to output the digital signal, sent through 26-pin low-profile header “Input
6 from the motion controller, to the connected external device here. A 2
nd
parallel port or an
external device like SmoothStepper is required for this function.
Output 6-
General purpose output -for Output 4