LC Packings SWITCHOS II, Руководство пользователя

Страница: 28 / 90

Installation and Getting Started
2-6
D850R3
User’s Manual Switchos
2.4 Using the Event Outputs or the FAMOS Auxiliaries
If no additional COM port is available or if the Switchos Advanced Microcolumn
Switching Unit is to be installed with a different or third vendor software
package, the switching valves on the Switchos can be controlled by:
a) the event outputs of the Switchos Loading Pump.
b) the Auxiliaries (P5) outputs of the FAMOS Microautosampler.
To connect the INPUTS connector:
a) Valves are controlled by the Loading Pump
Connect the INPUTS connector to the EVENTS outputs of the loading pump
using the connection cable P/N 160172 presented in FIGURE 2-4.
Switchos
INPUTS
Switchos
Events
EVENT3
EVENT6
EVENT7
to MS or another device
GROUND
GROUND
EVENT8
{
{
Micropump Switchos II
EVENT3 Valve A
EVENT6 Valve B
EVENT7 SSV
EVENT8 Trigger
FIGURE 2-4 Cable to control Switchos by the UltiMate System
b) Valves are controlled by the FAMOS Microautosampler
Connect the INPUTS connector of the Switchos, the P5 (AUXILIARIES)
connector of the FAMOS Microautosampler and the START IN input of the
UltiMate UV Detector using the connection cable P/N 160171 presented in
FIGURE 2-5.
Switchos
(INPUTS)
FAMOS
(P5 Auxiliaries)
UltiMate
UV Detector
(START IN)
FAMOS Switchos II
AUX1 Valve A
AUX2 Valve B
AUX3 SSV
AUX4 START
IN
FIGURE 2-5 Cable to control Switchos by the FAMOS P5 Connector