Configuration with the PC
Global settings
zirkon Configuration Manual
V 1.2
85/ 148
Fader
The zirkon system offers the possibility to alternate
between two different fader scales during operation.
The control input
Use Scale +9 dB
activates (with rising
edge) the scale which is printed on the channel modules.
Use Scale 0 dB
uses another scale not printed. For that
the 0 dB point at the top dead-stop. The characteristic
line corresponds about with printed one but shifted by 9
dB.
For the status repirt exist two outputs (Scale +9dB.active
and Scale 0dB.active). Depending on which status is
active its output is also active.
Application note:
Alternating between the two modes makes sense for
systems used by technically trained and less trained user.
The “DJ” works with the 0 dB scale using the fader as
“soft switch” driving it always to the top dead-stop. The
level should be nevertheless still in the working range
depending on the connected source, and depending on
the input amplification (see “Global settings meter!).
An “engineer” can mix with precision using a +9 dB scale
and, if required, gain the level.
