Configuration with the PC
Logic
70/ 148
V 1.2
zirkon Configuration Manual
Button16:(16)
With this function you programme easily monitoring
panels or programme switches.
It is a 1-out-of-N logic with N being maximally 16.
This function offers 16 inputs (
In 1-16
) and 16 outputs
(
Out 1-16
). When an edge is rising at one of these inputs,
the output with the same number is set to a logical “one”.
It remains set until another input is affected by a rising
edge.
Example:
A button triggers a rising edge for IN 1. By this, OUT 1 is
set to a logical “one” and remains in this status. Another
button triggers after 5 minutes a rising edge for IN3. OUT
1 is set to a logical “null” and OUT 3 is set to a logical
“one”.
This means that only one output can have a logical “one”.
After switching the zirkon on, output OUT 1 is
automatically set to a logical „one“.
With the control input “Pushout” you can set all outputs
to a logical “null”.
All control inputs are locked as long as “Disable” is
activated. Another of the inputs (In 1–16) cannot be set.
The status of all outputs is maintained.
The input Reset recovers automatically the default status
of this function, i. e. OUT 1 becomes active.
Application example:
This example shows the programming of a monitoring
selection with 8 buttons in the central module. The
buttons are labelled with the prefix MON, followed by the
monitoring signal, e. g. MON ON AIR, MON MAIN 1 or
MON N-1 TEL 1.
After the control inputs are assigned to the buttons
respectively you can start with the defining the colour of
the button lamps.
