Configuration with the PC
Fader–source–sum–assignment
58/ 148
V 1.2
zirkon Configuration Manual
The PFL sum and the pre-conference sums are without
signal processing and other control functions. This is
because they are controlled via the sources. Thus the
respective configuration lines are not available.
5.
Enter here a name for the sum and add the display
line (max. six characters)!
Fader–source–sum–assignment
After all sources and sums are defined it is now time to
assign the control panel.
1.
Double-click on the channel module of the control
panel view you want to configure!
The displayed window (Parameter ChannelModule) opens.
2.
Enter the name of the control module into the white
field (module)!
You can name up to 11 different sources per channel strip.
These are then available on the LCD buttons of the central
module.
3.
Double-click on the green field next to “Source”!
A tree selection opens.
The source, which is entered under Default Source 1,
appears after a reset on the surface.
4.
Click into the check box to set a check mark!
When a check mark is set under “Only Default” the source
under “Default Source” cannot be deselected.
If a source/sum selection shall be possible please note
that the MF buttons are labelled with printed foil
Therefore, only sources with the same MF button
assignment should be assignable to a channel strip.
A source can be made available in several channel strips
but not at the same time be assigned to the surface (see
chapter “operation” in the user manual).
For the handling with regard to this restriction it is
convenient to let the MF buttons show green when ready to
use (see chapter “Logic”). Then sums and mix-
minus/conference sums are assignable to nearly each
channel strip without the operation becoming confusing.
Hidden sources are generated by assigning a channel
module which in reality does not exist.
Tip
