Configuration with the PC
Configuring the buttons
zirkon Configuration Manual
V 1.2
45/ 148
Configuring the buttons
Multi-functional buttons
At this point we explain the configuration of the buttons to
you.
Only after the definition of the signals controlling the
LEDs you should generate a logical link.
The multi-functional buttons (MF buttons) can be
programmed for different applications.
1.
Double-click on a MF button in the view of the
central module (figure below)!
The window displayed here opens. The prompt is in the
respective line.
2.
Name the MF button clearly and confirm with the
“Enter” button!
The button is named.
You define the behaviour of the lamps behind the buttons
with the green fields labelled with Red, White, Green and
Blink.
3.
Double-click on the green field next to the colour
designation!
The tree selection opens.
4.
Select a condition for the colour!
A lamp lights up in the respective colour as long as the
control signal is logical “1”.
For the control of the key illumination applies:
•
Red has highest priority
•
Off has lowest priority
The order is: Red, White, Yellow, Green, Off.
Tip
