LAUNCH
TLT830WA Product Manual
11
z
Follow the wiring diagrams connect the hydraulic hose F1 to hydraulic pipe fitting F1 inside the control box,
the same, connect hose Z2 and F2 to hydraulic pipe fitting Z2 and F2 and tighten the fitting
S m a l l s c i s s o r o f f s i d e c y l i n d e r
S m a l l s c i s s o r t m a s t e r c y l i n d e r
b i g s c i s s o r o f f s i d e c y l i n d e r
b i g s c i s s o r t m a s t e r c y l i n d e r
T - f i t t i n g
Y J F
N O . 1 ( Z 1 )
N O . 2 ( F 1 )
N O . 3 ( Z 2 )
N O . 4 ( F 2 )
p u m p
s t a t i o n
Fig 9
z
Turn off the main high pressure cut-off valve on the big scissor, open the duty high pressure cut-off valve,
Press UP button, raise the auxiliary platform to 1.5 m (59') high, press the lowering button, makes
machinery insurance work. Requires host and auxiliary safety gear meshing at the same height position
so that the small scissor can be adjusted.
z
Press UP button
,
raise the host platform of the small scissor to 0.35M
(
13.8
″)
high
,
Turn off the main
high pressure cut-off valve on the big scissor, open the duty high pressure cut-off valve
,
Press UP button,
raise the auxiliary platform to the same height. Turn the main and auxiliary high pressure valve to a
working state
z
The oil pipe in the machine should be installed reliably and securely, avoid squeezing the pipe when the
machine is lowering Cause damage to the pipe affect the normal use of the device
z
Turn the main and auxiliary high pressure valve to a working state after all the oil pipe have been
installed.
z
For surface mounting, after piping connected to the slot cover plate must be installed
5.2.5 Anchoring
z
Wrap the oil fittings, cable connections and joints of the lift to prevent dusts from getting in.
z
With the help of the holes on the base plate, drill and install the anchor bolts. In the process of drilling,
make sure that there is no movement at the base frames. Fasten the base frames of the lift to the pits with