LAUNCH
TLT830WA Product Manual
29
10 Maintenance
10.1 Daily Maintenance
z
Keep the lift clean. Make sure power is cut off before cleaning the lift.
z
Keep the working area clean. Excessive dust in the work area will shorten the lifespan of the lift.
z
Before operation, inspect and keep all the safety devices of lift in order. If any problems are found, adjust, maintain or
replace the parts timely.
z
Make sure that the pits are kept dry and clean.
z
Inspect if there is leakage in the air valve and if it is well-lubricated.
10.2 Monthly Maintenance
z
Refasten the anchor bolts.
z
Check all the hoses and fittings for possible wearing and leakage. If any leakage is found to be caused by worn sealing
parts, replace with parts meeting the specifications.
z
Check if the roller slide is well-lubricated with high-quality #2 lithium lubricant.
z
Apply #2 lithium lubricants on a monthly basis.
10.3 Biannual Maintenance
z
Check all the moving parts for possible wearing, interference and damage.
z
Inspect the lubrication of all the rollers. If the roller is dragged along in lifting or lowering, apply lubricant to the roller
shaft.
z
At the end of the first six months, clean the hydraulic system and replace the hydraulic oil. Replace the hydraulic oil
with N32 hydraulic oil in winter and N46 in summer.
10.4 Maintenance for 3 Years or 5000 Times Operations
z
Replace the bushings at all joints.
z
Replace all seals
z
Replace the rollers.
11 Storage and Scrapping
11.1 Storage
When the lift needs to be stored for a long time:
z
Unplug from power socket.
z
Lubricate all the parts, including all the contact surface of the rollers.
z
Bleed oil from tanks.
z
Cover the lift with plastic hood.
11.2 Scrapping
When the lift has exceeded its lifespan and can not be used any more, disconnect it from the electrical supply and dispose of
as required by the local regulations.