Lauda PROLINE Edition X P 12 C, Руководство по эксплуатации

Страница: 22 / 116

Proline Edition X heating thermostats
22
Preparation
YACE0099 / 10/9/2018
6 Preparation
6.1 Assembly and sitting

Site the unit on a flat surface
 
The unit must not be put into operation if its
temperature during storage or transport has
dropped below the dew point.
Wait for about one hour.

Do not cover the ventilation openings at the
back of the control head.

When used as a bath thermostat put the by-
pass valve in
“internal” position (without “ex-
ternal load”) (

3).
Operation with external loads
(Circulating thermostat) continue at (

6.5).

Check whether the pump connectors at the side and back are fitted with seal-
ing caps (

Section 3) or that hoses are fitted for external loads.

With bath temperatures over 70 °C the supplied self-adhesive label
should be applied on the bath at an easily visible point.

Do not carry out technical changes on the device!
 
The unit can safely operate up to an ambient temperature of 40 °C.