26
LatticeXP2 Advanced
Lattice Semiconductor
Evaluation Board User’s Guide
open as shown in Figure 6. Select
Device Access Options
and
SPI Flash Programming
as shown in
Figure 7.
Figure 6. Device Information Dialog
Figure 7. SPI Serial Flash Device Dialog
8.
Select
Browse
and point to the location of the bitstream file. Note that if you have a “.JED” file output from isp-
LEVER, you can convert it to a “.BIT” file using ispVM and selecting the
UFW (Universal File Writer) icon
with
the input file being the “.JED” file from ispLEVER and the output file being a “.BIT” file.
9.
Select
Flash Device
and in the
Select Device
window, change the selections as shown in Figure 8. Press
OK
to close the
Select Device
window.
