Laserscale SET-HD100, Инструкция по эксплуатации

Страница: 42 / 74

SET-HD100
(6)
(E)
• If using a water-soluble cutting fl uid or other fl uid, ensure that there is adequate protection so that it does not adhere to
the scale unit.
• Never place objects on top of the installed scale unit, rest your elbows or feet on the scale unit, or otherwise apply
excessive force to the scale unit.
• Do not drop or bump the product. Excessive impact, stress or other force may result in malfunction.
Notes on storage
• When not using this product, store it in a low-humidity environment.
Storing or otherwise leaving the product in a location subject to condensation or with high temperatures or high humidity
may cause the optical parts to deteriorate and might cause malfunction. Particular care should be taken when storing or
leaving the product in a clean room, as condensation can easily occur when clean room power supply is stopped. Attach
the protective caps to the connectors for transport. Also, be sure to always keep the product dry such as sealing it in a
container with silica gel.
Treatment for export
• Th is product corresponds to an angle measurement device under Japanese Export Trade Control Order, Appended Table
1: List Control Items, Section 2 (12)2, Ministerial Order Article 1-17. Be sure to check the relevant laws and regulations
and obtain proper authorization before exporting the product. Note that this Instruction Manual, the specifi cations, and
the calibration certifi cate are subject to the same handling restrictions as the product.
General Precautions
When using Magnescale Co., Ltd. products, observe the following general precautions along with those given specifi cally in
this manual to ensure proper use of the products.
• Before and during operations, be sure to check that our products function properly.
• Provide adequate safety measures to prevent damages in case our products should develop malfunctions.
• Use outside indicated specifi cations or purposes and modifi cation of our products will void any warranty of the functions
and performance as specifi ed of our products.
• When using our products in combination with other equipment, the functions and performance as noted in this manual
may not be attained, depending upon operating environmental conditions. Make full study of the compatibility in
advance.
In no event will Magnescale Co., Ltd. be liable for any damages, including any lost profi ts, third-party claims, or other harm
arising out of the use of this product.