Laserscale SET-HD100, Инструкция по эксплуатации

Страница: 63 / 74

SET-HD100
(E)
19
8. Specifi cations
8-1. System Specifi cations
Item Specifi cation Notes
Detecting radius 41.723 mm
Maximum rotary response
speed 10 min
-1
10 min
-1
= 10 rpm
Number of source signals 2
20
(1,048,576) / revolution
Source signal resolution 1.236" arcsec
Accuracy At calibration ±0.1 arcsec Accuracy at calibration is the half width of the angle deviation
stated in the enclosed calibration certifi cate.
Th
e calibration conditions are described in section 8-3 “Calibration
Conditions”.
Th
e calibration certifi cate does not directly state that the accuracy
is within ±0.1", but the angle deviation data at each angle point is
saved on the enclosed CD-R, so the accuracy can be confi rmed
from those values.
Within the
installation
tolerance
range ±0.2 arcsec Accuracy when performing the operations described in section 4
“Operation” within the range described in section 8-2 “Installation
Error Range and Environmental and Rotational Accuracy
Conditions for Guaranteeing Accuracy”.
Reference point position One point
Reference point detection
direction One direction (clockwise)
(Th
e reference point is not
detected when rotated in the
counter-clockwise direction.)
Check section 9 “Dimensions” for the clockwise direction.
Th
e counter-clockwise direction is the direction opposite the
clockwise direction.
Reference point accuracy ±20" arcsec (at 20°C) Including the reproducibility when detecting the reference point.
Output format USB interface
Number of interpolations 2
10
(1024) / revolution
Number of output divisions 2
30
(1,073,741,824) / revolution
Output resolution 0.0012 arcsec