LaserMech FiberMINI 2.0, Руководство по эксплуатации

Страница: 33 / 54

PLMNL0286 REV. B, Effective Date: 06/06/19
28
FiberMINI
®
with Auto Focus (AF) Operation Manual
o
Click on the arrow to the right of
the FAULT indicator to display a
list of faults present in the system.
See
Figure 27 .

Active faults are identified
using a red indicator.

Recovered faults are
identified using an amber
indicator.
Figure 27
o
Height sensor faults can usually
be cleared by clicking the
Calibrate button ( ) in the
toolbar.
Refer to
Section 3.8 for the
manual HSU calibration
procedure.
o
Position faults can usually be
cleared by clicking the
Reset
Servo button ( ) in the
toolbar.
o
Once all fault conditions are
cleared, the indicator will change
states to RECOVERED. See
Figure 28 .

The system is ready while in
this state, but the fault list is
still available to advise you of
previous faults.

It is often helpful with
troubleshooting to record the
faults, for example using the
Print Screen command.
Figure 28

To acknowledge the fault(s) and
remove the highlighting, click on
the
Clear Resolved Faults button (
) in the toolbar, or from the
fault list and select “
Clear
Resolved Faults
”. See
Figure 28 .