LaserMech FiberMINI 2.0, Руководство по эксплуатации

Страница: 31 / 54

PLMNL0286 REV. B, Effective Date: 06/06/19
26
FiberMINI
®
with Auto Focus (AF) Operation Manual
4.3 Connecting
To connect a FiberMINI
®
(see Figure 24 ):
1. Click on the Port drop down menu
near the bottom of the window and
choose the appropriate port.
2. Click Connect.

The Device Manager also lists the
port number of the cable as “USB
Serial Port.”
Figure 24
Alternately, you can also connect by
clicking the Connect button ( ) in the
toolbar then selecting the appropriate port
from the menu. The main screen will
appear. See
Figure 23 . To disconnect,
click the Disconnect button ( ) in the
toolbar.
4.4 Monitor
After you connect FiberMINI ® Monitor a
series of meters appears. See Figure 25 .
Figure 25

The settings are based on
temperature ranges. Each meter
displays the upper and lower limits in
small digits, along with the current
value and a scale representing the
current value. See
Figure 25.
o
If the sensor is within the normal
operating range, the scale is
displayed in green.
o
If the sensor is in a faulted state,
the scale is displayed in red.
o
If the sensor has recovered from a
fault, the scale is displayed in
amber.