46 |
P a g e
6.2
Laser Safety Guidelines
These guidelines are for your own protection and that of others around you. Lasers have a unique set of dangers not
present with other equipment common at work or at home.
Like most laser point devices, it is important to exercise caution with operating this device.
Never look into the beam of this or any other laser. This also includes pointing it at others around you.
Always turn off the laser beam when it is not being used to avoid accidental eye exposure.
When adjusting or aligning a laser, beware of reflections from all surfaces.
Never randomly aim a laser at other people. Although this laser is low power, direct eye contact should always
be avoided. This is a tool just like any other power tool on a job site and should be treated that way.
Instruct anyone else with you as to the hazards of laser light and make sure they understand all of these
guidelines. Those with you may actually be in MORE danger because you will know what to expect and what to
avoid unlike them.
This product conforms to IEC Regulations
6.3
Using the Computer with Other Programs
The computer that comes with this laser runs a full installation of Windows and can run most Windows compatible
programs. However, installing any programs other than those that are installed at the time you receive it can alter or
hinder operations and functionality. We strongly suggest you only use this tablet for templating and other related
functions.
We do not support the Laser Templator software on domains for networked usage. We will try to help where needed
but cannot guarantee we will be able to solve issues outside of the core functionality of the software.
6.4
Cleaning / General Care and Storage
The LT-2D3D are precision measurement tool and needs to be treated with care. Please follow the guidelines below.
Make sure the lens of the laser is clean before starting every job. Finger prints and smudges can affect accuracy
of the laser.
Handle the tablet PC with care. This is a computer and like all computers, if they are treated roughly, the internal
components or outside casing can be damaged.
o
As stated above in the warranty, misuse / abuse is not covered in the warranty which include but are not
limited to:
Cracked / broken screens.
Over-rotated screens (on tablets that have them) caused by rotating in the wrong direction or
going past the point in which they are supposed to be stopped.
Dropping any part of the device leading to cracked outside housing or damaged internal
components.
6.5 LT-2D3D Laser Templator Specifications
The LT-2D3D software was designed to be used on any current Windows computer (Windows XP, Vista, 7, 8, and 10).
We have heard of customers using it on Windows Server 2000, 2003 and 2008 however we have not tested this nor do
we support it. If you choose to install the software on a server, we offer no support.
LT-2D3Ds built after 2/15/2016 are do not use a leveling base anymore. Because of this, you can use this laser on any old
tripod that doesn’t have a leveling base. However, you CANNOT use an older LT-55 XL/LT-2D3Ds on a new tripod that
came with one of these LT-2D3Ds.
