22 |
P a g e
1.
Click the line you want to split
2.
Enter an amount to split the line from the front edge
3.
You will see the line split with a yellow line appearing to show the split and press OK
2.13 Flip / Scale
Flip will allow you to flip a drawing horizontally, vertically or both. This would be sued for when you draw a custom
corner and want to flip it to use it on the opposite edge.
Scale allows you to quickly double or half the size of a drawing. You can also enter a custom percentage to scale it.
2.14 Add Photo
Adding photographs to you job can be a very valuable tool; you can use the built in camera on the tablet to take job site
reference pictures.
To take photographs with the tablet follow these steps:
2.
Click Add Photo from the Edit menu
3.
Click Start Camera
4.
Point the back of the tablet at the area you want to photograph
5.
Click Capture
6.
To view the captured photographs, click View Images
These photographs will be located in the same folder as the templated .dxf and the estimate file.
2.15 Erase Segment
Erase Segment will erase one line segment. To erase a segment:
1.
Click Draw
2.
Click Erase Segment
3.
Click on one end point of the segment
4.
Click on the other end point of the segment
Remember, every line has 2 end points, as well as a midpoint. When a line intersects another line that is not at the
midpoint, it will create new end points and midpoints.
