39 |
P a g e
3.2
Setting Comports (Purchased Pre-February, 2016)
1.
Open the Laser Templator program
2.
Click File / Help / Setup Device
a.
Double click in the box to the right of Laser Connection.
b.
Double click on the correct COM Port # from the steps above.
c.
Double click on the box to the right of Encoder Connection
d.
Double click on the correct COM Port # from the steps above.
3.
Click Connect and wait for the laser to connect.
3.3
Pair Laser to the Tablet PC (Purchased Post-February, 2016, marked R4.1 on the
bottom label)
1.
Turn on tablet PC
2.
Once finished booting, plug in USB cable and wait until you hear a kerplunk sound indicating it has
connected.
3.
Click Start (Windows logo) and type Devices and Printers. Click Enter
a.
Click Add a device
b.
Turn on the Laser by pressing the power button.
c.
A green LED will light up on the side indicating it is on.
4.
You will see a device appear that is first named “Disto ######”
5.
Click on that device and then click Next.
6.
Click Start (Windows logo) and type Device Manager. Click Enter.
