Laser Products LT-2D3D Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 50

background image

42 |

P a g e

different distances away from itself. To prevent reflection, try to place the laser beam about 3” away from a
corner, directly in the corner and then again 3” away from the corner. This way you will be able to get an accurate
measurement of both walls and account for any drywall mud build-up.

4.4.2

Drastic Angles

Drastic angles will cause the laser dot to become elongated. The longer this dot becomes the more of likelihood
that a measurement might be incorrect. Try to keep the dot to no longer than 1” in width. Beyond 1”, consider
placing the laser in a different location or using a target to prevent the elongated dot.

4.4.3

Dirty Lens

Just like the lens of a camera, it is important to keep the lens of the laser clean to ensure proper measurements. It
is recommended that before each job you check the lens to make sure there are no fingerprints or other smudges
present. If necessary, use the included microfiber cloth to clean the lens.

4.5 Micro Adjust

The Micro Adjust allows the user to make finer adjustments to the laser beam location on the surface you are
measuring.

4.5.1

Mounting on Tripod

When attaching the LT-2D3D to the tripod, position the horizontal micro adjust knob so that it is in a convenient
position as it will remain stationary relative to the tripod.

4.5.2

Usage

The micro adjusts for horizontal and vertical movement are engaged by pulling the black knurled knobs outward
and disengaged by pushing them in towards the unit. The micro adjusts should always be disengaged when
moving the laser manually.

4.5.3

Adjusting Tension

The tension for the micro adjust knobs can be adjusted with a small flathead screwdriver. The screws for these are
located just next to the respective micro adjust knob, on the flat side of the plates.

When adjusting the tension on either the manual movement or the micro adjusts, small changes will have a large
affect. Also, changing the manual movement tension will likely require the micro adjust tension to be adjusted as
well. If you notice the micro adjust slipping, loosen the tension on the manual movement setscrew slightly.

The tension for manual movement of both the horizontal and vertical axes can be adjusted via set screws using a
0.050" hex driver. The set screw for the horizontal movement is on the bottom of the unit, between the level vial
and tripod mount. The set screw for vertical movement is just below the 2D lock knob.

4.6 Micro Adjust

The Micro Adjust allows the user to make finer adjustments to the laser beam location on the surface you are measuring

«
...
40
41
42
43
44
...
»

Содержание LT-2D3D



















































Отзывы:

Нет отзывов

Похожие инструкции для LT-2D3D

TUNICS T100S-HP

Бренд: Yenista Optics Страницы: 66

Бренд: HANYOUNG NUX Страницы: 4

Бренд: jenway Страницы: 30

Бренд: National Meter & Automation Страницы: 24

Бренд: Lakeshore Страницы: 2

Бренд: Kamstrup Страницы: 4

Power Xpert PXM 4000

Бренд: Eaton Страницы: 28

Бренд: Oakton Страницы: 69

Бренд: Unipulse Страницы: 129

Бренд: IDEAL Страницы: 11

Бренд: IDEAL Страницы: 16

Бренд: Waterproof Страницы: 10

Бренд: Ocean Optics Страницы: 43

Бренд: Ocean Technology Systems Страницы: 12

Бренд: Ocean Reef Страницы: 24

Бренд: Yamaha Страницы: 12

KINGFISHER PLUS+

Бренд: semaphore Страницы: 247

Бренд: Ocean Reef Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды