NMS044 Reference Manual
Removing Cables from Case
A-6
A.6 Removing Cables from Case
In the event that the cables need to be removed from the case, follow
these steps:
Step 1
Remove the CBL228-03 from the charge controller by
unscrewing the terminals and gently pulling the cable out.
Remove the CBL222-08 from the top of the 831C by
pressing the release button and pulling out.
Step 2
Unscrew the gasket by turning counterclockwise.
Step 3
Using your hands on either side of the case wall, gently
push the rubber stopper out. The cable can be removed
through the slit in the stopper.
Step 4
Follow the steps in reverse order to reinstall the cables in
the case.
FIGURE A-3
Removing Cables from Case
1
2
3
4
