NMS044 Reference Manual
Configure the RV50 Gateway
2-6
Step 7
Enter the APN provided by your cellular provider in the
User Entered APN.
Step 8
Click Apply and Reboot.
Step 9
Login again. Navigate to
Status
Home
Network State
.
This should say Network Ready if everything was correct.
Verify the Active WAN IP Address matches the static
address given to you by your cellular provider.
FIGURE 2-7
Status
Step 10
Disconnect the USB from the PC and RV50. Return the mini
USB to the RV50.
FIGURE 2-8
Disconnecting USB/Reconnecting USB
Step 11
Perform a reboot on the 831C.
ON/OFF
0
Reboot.
By connecting via IP address to the 831C prior to deployment, you can
determine if the service is working properly. To connect to the 831C
with a mobile device, follow these steps:
Step 1
Open a web browser (Chrome is recommended) on your
mobile device.
Disconnect the USB from the PC
and RV50
Return the mini USB to the RV50.
