NMS044 Reference Manual
Install Pole and EPS2116 to System
3-5
Step 2
Wrap the cable around the pole (2) two times in a counter
clockwise orientation. Place into the bracket and twist
clockwise to tighten.
FIGURE 3-7
Telescoping Pole with EPS2116 to system
Step 3
Extend the sections of the pole by loosening the
telescoping pole clamp and then tighten.
Step 4
Use hook and loop cable straps (already on the cable) to
fix the signal cable to the pole.
Step 5
Use the guy wires and stakes to steady the pole by
attaching them to the guy wire ring and then to the
ground.
