LT-3100 User & Installation Manual Rev. 1.06
Installation and Mounting
Lars Thrane A/S
www.thrane.eu
Page 25 of 155
Pole Mount (2.0
”
pipe, 53.0 mm), Antenna Unit
The Pole Mount (2.0” pipe, Ø53.0
mm), Antenna Unit is illustrated in Figure 28 to Figure 30.
Pole mount installation procedure:
1.
Feed the coaxial cable through the pole mount
2.
Fasten the coaxial cable to the LT-3130 Antenna Unit (N connector)
3.
Apply self-volcanic tape on the N connector and cable to protect against saltwater and corrosion
4.
Screw the pole mount (clockwise) on the LT-3130 Antenna Unit, and fasten the antenna lock pinot
screw, as illustrated in Figure 30 (max torque = 1.2 Nm)
5.
The LT-
3130 Antenna Unit and pole mount can now be mounted on the 2.0” pipe. Fasten the three
pole lock pinot screws, as illustrated in Figure 29 (max torque = 4.5 Nm)
NOTE
:
Remember to fasten the antenna lock pinot screw (1.2 Nm) after the pole mount and
antenna unit have been screwed together.
NOTE
:
The
Pole Mount (2.0” pipe, Ø53.0
mm), Antenna Unit
interfaces to a pipe of maximum 2.0”
(53.0 mm), measured outer diameter.
Figure 28
: Pole Mount (2.0” pipe
, Ø53.0 mm), Antenna Unit.
Содержание LT-3100
Страница 2: ......
Страница 167: ...Lars Thrane A S Skovlytoften 33 2840 Holte Denmark www thrane eu...