Lars Thrane LT-3100, Руководство пользователя и инструкция по установке

Страница: 34 / 167

LT-3100 User & Installation Manual Rev. 1.06 Installation and Mounting
Lars Thrane A/S www.thrane.eu Page 23 of 155
Pole Mount (1.5” pipe, 38.8 mm) , Antenna Unit
The Pole Mount (1.5” pipe), Antenna Unit is illustrated in Figure 25 to Figure 27.
Pole mount installation procedure:
1. Feed the coaxial cable through the pole mount
2. Fasten the coaxial cable to the LT-3130 Antenna Unit (N connector)
3. Apply self-volcanic tape on the N connector and cable to protect against saltwater and corrosion
4. Screw the pole mount (clockwise) on the LT-3130 Antenna Unit, and fasten the antenna lock pinot
screw, as illustrated in Figure 27 (max torque = 1.2 Nm)
5. The LT- 3130 Antenna Unit and pole mount can now be mounted on the 1.5” pipe. Fasten the three
pole lock pinot screws, as illustrated in Figure 26 (max torque = 4.5 Nm)
NOTE : Remember to fasten the antenna lock pinot screw (1.2 Nm) after the pole mount and
antenna unit have been screwed together.
NOTE : The Pole Mount (1.5” pipe), Antenna Unit interfaces to a pipe of ma ximum 1.5” (38.1 mm),
measured outer diameter.
Figure 25: Pole Mount (1.5” pipe),
Antenna Unit.